大连喷砂加工 | 大连抛丸加工

Differences and advantages between sand blasting and shot blasting

Sand blasting is a method that uses compressed air to blow out quartz sand at high speed to clean the surface of parts. It is also called sand blowing in the factory. It can not only remove rust, but also remove oil. It is very useful for coating. It is often used for rust removal on the surface of parts; Surface modification of parts (this is the purpose of small wet sand blasting machine sold in the market. The sand is usually corundum and the medium is water); In the steel structure, the application of high-strength bolts for connection is a relatively advanced method. Because the high-strength connection uses the friction between the joint surfaces to transfer the force, the quality requirements of the joint surface are very high. At this time, the joint surface must be treated by sand blasting.


The new steel structure section steel can pass through a series of important equipment of shot blasting machine. It is composed of independent unit structures in many countries. In general, enterprise equipment does not need foundation. Main contents of equipment management: Manganese material shot blasting room, 4-16 polishing head, protective lining plate, feeding and discharging room body.


Shot supplementary information system, shot conveying and storage data system, optional shot system, dust removal control system, silencing room and the whole control cabinet. How much do you know about the brand and product types of shot blasting machine equipment? Dalian sand blasting believes that it is an information age. Today, with the development of network economy, everyone will choose to find the brand of shot blasting machine through the information network, right?


The shot blasting machine industry has existed for more than ten years. Now there are countless shot blasting machine manufacturers. There are physical manufacturers and traders. How can they distinguish? Xiaobian recommends you to conduct on-site research and investigation. The on-site research and investigation can not only see the scale of manufacturers, but also see the quality of these equipment from a close distance. As the company's customer management needs shot blasting workpieces with different structural sizes, the shot blasting machine equipment is customized according to large workpieces. When the workpiece required by the customer's development is small, it can be used as a part of controlling the shot blasting machine, that is, opening the shot blasting machine, so as to save resources and energy, reduce cost consumption, and improve the service life of the whole system equipment.


分享到